Chem Master® Modified XLPE (125-200)SD


Formerly Mustang® Hose

(Specification 4695, 4695G)

RECOMMENDED FOR: Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Mustang contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its Modified Cross-Linked Polyethylene tube stock is “best in class” for maintaining a tight seal with stainless steel fittings, and is designed for cleaning with “open end” 50 PSI steam or in a bath containing 10% (NaOH) at 100°C. Cleaning in place (CIP) methods may be used. Applications include over 950 basic chemicals that are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection.

CAUTION: For applications requiring greater than 90% sulfuric acid contact Gates. Mustang is designed to withstand fluid temperatures to +121°C, however the rating is dependent on the specific chemical conveyed. Contact Gates for any chemical above +52°C. NOT RECOMMENDED FOR “CLOSED STEAM” CLEANING.

TEMPERATURE: -40°C to +121°C normal service.

CONSTRUCTION: Tube: Type K (Gatron Modified Cross-Linked Polyethylene.) Tan. High chemical resistance.
Reinforcement: Synthetic, high tensile textile cord with steel wire helix.
Cover: Type P (EPDM). Black or green corrugated with orange spiral stripe. Blue, red, and yellow covers available on special order.
Design Factor: 4:1

COUPLINGS: Gates has tested hose assemblies at the maximum rated service temperature to assure your safety. Use 7, 8, or 49 for fluid temperatures to +52°C. Use permanent fittings only 71 or 73 for fluid temperatures above +52°C and up to +121°C or 80 Gates GSP (2" only). Reference the Hose Coupling Section.

PACKAGING: All lengths coiled and wrapped in polyethylene.

BRANDING: Continuous transfer label. Example: “Gates® Chem Master® Modified XLPE (125-200)SD Acid-Chemical Suction/Discharge 200 psi (1.38MPa) WP Made in U.S.A. For your safety: Use Permanent Couplings above 52°C.”

SPECIAL ORDER REQUIREMENTS: Blue, red, and yellow covers are made to order and require minimum production order quantities of 122 meters per size. Special production runs require minimum order quantities of 122 meters per size. If a special transfer label is required, contact Gates Corporation for minimum quantity.

Specific cut lengths available through the Cut Length Program. Contact Customer Service for details.

REMNANT LENGTHS: Remnant lengths are sometimes available in popular sizes at a discount. Contact Gates Corporation for pricing, order requirements and availability.

Register to Access Your Resource