gates_logo POWERING PROGRESS™

Chem Master® Paint Spray (500-750)


Formerly 77B Paint Spray & Chemical Hose

(Specification 3207T)

RECOMMENDED FOR: Paint spray applications, as well as transfer of petroleum based products (aliphatic, aromatic and chlorinated hydrocarbon such as Toluene, Xylene, Benzene, gasoline and carbon tetrachloride).
Reference Gates Chemical Resistance Table for proper hose selection. Compatible with commercially available Bio-Diesel fuels up to B-100.

CAUTION: Contact Gates when conveying chemicals above +49°C.

NOT RECOMMENDED FOR ACIDS OR USE IN HIGH PRESSURE PAINT SPRAY APPLICATIONS REQUIRING A STATIC CONDUCTIVE HOSE.

TEMPERATURE: -40°C to +66°C continuous service.

CONSTRUCTION: Tube: Type Z (Special Flexible Nylon II). Clear.
Reinforcement: Synthetic, high tensile textile cord.
Cover: Type A (Neoprene). Black.
Design Factor: 4:1

COUPLINGS: 48. For paint service: Binks 3 piece compression ring only. Reference the Hose Coupling Section.

PACKAGING: 1/4" through 1/2": Packaged in 183m to 244m reels. Maximum 4 pieces. One length 8m to 15m. Maximum of 2 pieces under 30m.
3/4": Packaged in 91m to 122m reels. Maximum 3 pieces. One length between 8m to 15m. All other lengths over 15m. Maximum 2 pieces under 30m.

BRANDING: Continuous ink print label. Example: “Gates® Chem Master® Paint Spray (500-750) 3/8" (9.5mm) 500 psi (3.45MPa) WP Made in U.S.A.”

SPECIAL ORDER REQUIREMENTS: Special production runs require minimum order quantities of 7620 meters for all sizes.

REMNANT LENGTHS: None.

Register to Access Your Resource